• • • • Manufactured home HUD tags and data plates are confusing. Add the VIN and serial number and HUD number and it gets even more frustrating. For example, manufactured home HUD tags and data plates are confusing because a plate is not a plate and a tag really isn’t a tag, A data plate is a simple sheet of paper. Granted, that simple piece of paper has a lot of important information on it. A certificate is not the same as a plate or a manufactured home HUD tag, but it is displayed on a tag. A tag is different from a data plate but has the same information as a certificate.
Condor mdr2 11 manual transfers. If you are a Fleetwood homeowner, and have a service question or need service, please. Please enter your Fleetwood Home manufacturer's serial number. Dec 27, 2012 - These are the first questions we get asked at manufactured home inspections. •Why are there two VIN numbers on some mobile home titles? If you can locate either the HUD certification number or the serial number, then.
2 Labels, 2 Numbers To simplify it all, remember that there are only 2 main labels attached to a factory-built home: a manufactured home HUD tag and a Data Plate. In addition to the two labels, there are 2 main numbers used in the manufactured home industry: a serial number and a certification number. The certification number is stamped onto the HUD tag. The serial number is not. Manufactured Home HUD Tags 101 A manufactured home HUD tag is a metal plate that is riveted onto the exterior of the home. It has a certification label number stamped into it. Manufactured home HUD tags are also called construction code labels, certification labels, and HUD labels.
There should be a red metal tag with silver text riveted to the rear exterior of each section of every manufactured home built since 1976. This metal tag has 3 letters and 6 numbers stamped into it.
It gets confusing because there are several terms used when referring to this metal tag. They come from the fact that the certification number is stamped onto the HUD tag or HUD label. Here are a few of the different names I’ve seen used for this metal tag: • HUD Tag • Construction Code Label • Certification Label • HUD Label. If that’s not confusing enough, the HUD website plainly states that the metal must be red with silver lettering. So, why are there black labels and silver labels?
The best explanation I could find is that the red paint sometimes chips off and the different color is simply based on whatever kind of metal the factory used to make the tag. What Information is Displayed on Manufactured Home HUD Tags? A manufactured home HUD tag, or certification tag, is the metal plaques attached to the exterior of your home that is 2″ wide and 4″ long. It proves that the home was inspected at the factory and passed. The tag is typically placed one foot above the bottom and one foot from the edge of the back of each section of a manufactured home. Manufactured home HUD tags have the same paragraph on every manufactured home in the US. It reads: The manufacturer certifies to the best of the manufacturer’s knowledge and belief that this manufactured home has been inspected in accordance with the requirements of Department of Housing and Urban Development and is constructed in conformance with the federal manufactured home construction and safety standards in effect on the date of manufacture.
See data plate. Label Numbers Within the first sentence of that metal tag, there are 3 letters, a dash, and then 6 numbers. These are different for every manufactured home in the country. The number and letter sequence is the certification label number. This means that the home was inspected in the factory before it left and met all the requirements set by HUD in the Federal Manufactured Home Construction and Safety Standards law.